Get SIPs

4' x 8', 4' x 9', 4' x 10', 4' x 12', 4' x 14', 4' x 16', 4' x 18', 4' x 20', 4' x 24'
8' x 8', 8' x 9', 8' x 10', 8' x 12', 8' x 14', 8' x 16', 8' x 18', 8' x 20', 8' x 24'

* Continuous Insulation R factor at 40°F

Panels can be cut to match any height requirement, such as Gable Ends. Panels can also be cut to unusual heights or lengths like 9' 3 1/2".

Any size opening can be cut out of the panel to accommodate project specifications. This dramatically reduces build time.

The top of SIPs wall can be beveled cut to match any roof pitch or any other requirement.

Spline connectors can be pre-installed into the panels at the factory speeding up the installation time and making it more convenient. OSB, Block, or Wood Spline connectors pre-installed and energy sealed at the factory can make the project much smoother.

Installing a window requires a window buck inset into the panels. One option for our RTA Assemble is to have the factory pre-install the window bucks and energy seal the inset. Another way to speed up construction installation time.

Sizing headers and getting suitable material can be a hassle. This RTA option takes the hassle out of headers by having the factory pre-install them. Insulated headers may also be an option with proper engineering.

This RTA option can have the rafter tails pre-installed or have the foam pocketed for field-installed rafter tails. This feature allows for stronger overhangs or could meet other design criteria.

The factory can assemble panels up to 8" high by 40' long sections for a project. These pre-assembled panels would have the energy-sealed splines connectors, the top plate, and any other RTA desired options.

Various styled Tongue and Groove panels can be added as an inside finish. The panels can come using a choice of pine or cedar.

Choose from a variety of stains to add to your T&G project. Want something unusual; we can do it.

An aluminum skin facer can be added to the panel to create a desired look or design. The aluminum skin is added at the factory to reduce installation costs and shorten construction time.

Fiberglass Reinforced Plastic (FRP) skins offer a great finished look that is durable, easy to clean, and lightweight.

T1-11 Skins can be added to the panels when an interior or exterior rustic vertical clapboard design is desired.

DensGlass or thermal boards can be Pre-installed as skin to offer a layer of fire resistance to a project.

Adding drywall or cement board skin to a SIP panel can give a desired outcome or design advantage. This factory option can speed up installation production and shorten build times.

GPS Insulation can add an additional R-value to a wall panel without changing the thickness. This insulation uses the principles of reflectivity to increase energy efficiency.