Get SIPs

Everything about Structural Insulated Panels

Get SIPs

Roof Panel Products

SIP Roof Panels

Blank SIP Roof Panels

Stacks Image 147

STANDARD SIZES

Standard Length and Width of SIP Panels
4' x 8', 4' x 9', 4' x 10', 4' x 12', 4' x 14', 4' x 16', 4' x 18', 4' x 20', 4' x 24'
8' x 8', 8' x 9', 8' x 10', 8' x 12', 8' x 14', 8' x 16', 8' x 18', 8' x 20', 8' x 24'
SIP Thickness
Actual R-Value
Performance Value
8.25"
R-33
R-50
10.25"
R-41
R-62
12.25"
R-48
R-72


SIPs benefit from Continuous Insulation. R-value factor tested at 40°F

Blank GPS SIP Roof Panels - High R-value

Stacks Image p609_n3

STANDARD SIZES

Standard Length and Width of SIP Panels
4' x 8', 4' x 9', 4' x 10', 4' x 12', 4' x 14', 4' x 16', 4' x 18', 4' x 20', 4' x 24'
8' x 8', 8' x 9', 8' x 10', 8' x 12', 8' x 14', 8' x 16', 8' x 18', 8' x 20', 8' x 24'
Standard Thickness of SIP Panels
SIP Thickness
Actual R-Value
Performance Value
8.25"
R-38
R-58
10.25"
R-47
R-71
12.25"
R-57
R-86


SIPs benefit from Continuous Insulation. R-value factor tested at 40°F

Pre-Cut SIP Roof Panels

Stacks Image 629

PRE-CUT OPTIONS

Cuts to Size
Any size opening can be cut out of the panel to accommodate project specification. This greatly reduces build time.
Stacks Image 624
Beveled Cuts
The edges of SIPs panels can be beveled cut to match any roof pitch or any other requirement.
Stacks Image 641
Skylight, Window or other openings Cut Outs
Any Panels can be pre-cut at the factory to allow for skylights, windows or other opening.

Ready To Assemble (RTA) SIP Roof Panels

RTA OPTIONS

Stacks Image 658
Pre-Installed Spline Connectors
Spline connectors can be pre-installed into the panels at the factory speeding up the installation time and making it more convenient. OSB, Block or Wood Spline connectors pre- installed and energy sealed at the factory can make the project run much smoother.
Stacks Image 662
Pre-Installed Skylight Bucks
Installing a window requires window buck inset into the panels. On option for our RTA Assemble is to have the factory pre-install the window bucks and energy sealing the inset. Another way to speed up construction installation time.
Stacks Image 666
Pre-Installed Rafter Tails or Openings
This RTA option can have the rafter tails pre-installed or have the foam be pocketed for field installed rafter tails. This feature allows for stronger overhangs or could meet other design criteria.

SIP Roof Panels with Add on Skins

Stacks Image 693

SKIN ADD ON OPTIONS

Wood Tongue and Groove Carsiding Skins
A variety of Tongue and Groove panels can be added as a skin using a choice of pine or cedar. The panels can come
Stacks Image 706
Pre-Stained Wood Tongue and Groove Carsiding Skins
Choose from a variety of stains to add to your T&G project. Want something unusual, we can do it.
Stacks Image 715
Aluminum Skins
An aluminum skin facer can be added to the panel to create a desired look or design. The aluminum skin is added at the factory to reduce installation cost and shorten construction time.
Stacks Image 724
FRP Skins
Fiberglass Reinforced Plastic (FRP) skins offers a great finished look that is durable,easy to clean and light-weight.
Stacks Image 733
T1-11 Skins
T1-11 Skins can be added to the panels when an interior or exterior rustic vertical clapboard design is desired.
Stacks Image 742
DensGlass Skins
DensGlass or thermal boards can be Pre-installed as skin to offer a layer of fire resistance to a project.
Stacks Image 751
DryWall or Cement Board Skins
Adding drywall or cement board skin to a SIP panel can add an advantage for a desired outcome or design. This factory option can speed up installation production and shorten build times.

High R-Value GPS SIP Roof Panels

Graphite Polystyrene (GPS) SIPs

Stacks Image 670
High R-value GPS Neopor
GPS Insulation can add addition R-value to a Roof SIP panel without changing the thickness. GPS or Neopor SIPs insulation uses the principles of reflectivity to increase energy efficiency.